17 Best Marlin 336 Scope Mounts of 2026 For Natural Cheek Weld

1

Monstrum Dual Ring Scope Mount | Compatible with Marlin 336/1894/1895

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.3
• Brand
  Monstrum

Key specs2

Ring Diameter

1 inch

Receiver Mounting Style

Direct receiver attachment combines the base and rings into a single system for Marlin 336, 1894, and 1895 rifles.

Pros & cons33

Pros

• Integrates scope rings and base into a single unit for direct receiver mounting
• Designed specifically for Marlin 336, 1894, and 1895 lever-action receivers
• Fits standard 1-inch scope main tubes without needing separate mounting rings

Cons

• Restricts optic choices to 1-inch tubes and cannot mount 30mm optics
• Fixed ring spacing does not allow custom eye relief positioning along a rail
• Height profile is unlisted so cheek weld alignment must be verified

2

Monstrum Forester Scope Rings for Marlin 336/1894/1895 Lever Action Rifles

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.7
• Brand
  Monstrum

Key specs2

Ring Profile

High profile

Scope Clearance

High profile leaves ample vertical clearance over the receiver for larger objective bells and exposed hammer cocking.

Pros & cons42

Pros

• High-profile design gives generous vertical clearance for larger objective bells
• Sized for 1-inch scope tubes on Marlin 336, 1894, and 1895 receivers
• Direct-mount Forester ring setup eliminates the need for an intermediate rail
• Leaves open clearance below the ocular bell for thumb access to the hammer

Cons

• High profile lifts the scope axis and compromises natural cheek weld on low combs
• Incompatible with scopes that utilize larger 30mm main tubes

3

Game Reaper Marlin 1894,1895 and 336-Medium Mount (Black, 1 inch)

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.5
• Brand
  Game Reaper

Key specs2

Mount Height Profile

Medium profile

One-Piece Construction

Direct mount design bolts straight to factory drilled Marlin holes without needing separate base rails.

Pros & cons42

Pros

• Medium mount height balances objective bell clearance with comfortable cheek alignment
• One-piece Game Reaper design bolts straight to Marlin 336, 1894, and 1895 receivers
• Fits 1-inch rifle scopes without separate ring alignment or base connection points
• Finished in non-reflective black to match traditional lever-action steel receivers

Cons

• Limited strictly to 1-inch tubes with no accommodation for 30mm scope bodies
• Fixed ring placement limits forward or rearward scope positioning flexibility

4

G-Sight Marlin 336 and 1895 Picatinny Scope Mount 0 MOA

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.9
• Brand
  G-Sight

Key specs2

Base Material

Precision CNC machined 7075 aluminum

Incline Angle

0 MOA

Pros & cons42

Pros

• CNC-machined from rugged 7075 aluminum for high strength under heavy recoil
• 0 MOA flat elevation preserves full internal optic elevation adjustment
• Picatinny profile accepts a wide variety of scope rings, prism scopes, and red dots
• Direct fitment for Marlin 336 and 1895 factory drilled receiver holes

Cons

• Requires purchasing separate Picatinny scope rings to mount a traditional optic
• Adds rail height on top of the receiver compared to direct-mount integrated rings

5

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.7
• Brand
  Monstrum

Key specs2

Rail Standard

Picatinny and Weaver compatible

Base Elevation

0 MOA flat rail

Pros & cons32

Pros

• Cross-slot interface accepts both Picatinny and Weaver standard mounting rings
• Flat 0 MOA base matches typical woods hunting ranges for lever-action rifles
• Drilled to align with factory tapped holes on Marlin 336, 1894, and 1895 receivers

Cons

• Needs standalone scope rings before an optic can be installed on the rifle
• Specific aluminum alloy grade is not detailed in the manufacturer specifications

6

Game Reaper Marlin 1894,1895 and 336-High Mount (Black, 1 inch)

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.4
• Brand
  Game Reaper

Key specs2

Ring Profile

High profile

Receiver Hole Compatibility

• Marlin 336
• Marlin 1894
• Marlin 1895

Pros & cons43

Pros

• High profile elevates 1-inch scopes to clear larger objective bells off the barrel
• Integrated Game Reaper ring-and-base construction avoids loose intermediate joints
• Compatible with Marlin 1894, 1895, and 336 drilled receiver patterns
• Matte black finish blends cleanly with blued or cerakoted lever-action actions

Cons

• High ring saddle raises line of sight significantly above the factory comb drop
• Fixed ring positions offer no fore-and-aft adjustment along the receiver top
• Cannot accept scopes equipped with 30mm main tubes

7

Monstrum Forester Scope Rings for Marlin 336/1894/1895 Lever Action Rifles

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.4
• Brand
  Monstrum

Key specs2

Mount Height Profile

Medium profile

Tube Fitment

1 inch main tube scopes

Pros & cons42

Pros

• Medium profile maintains moderate scope clearance while aiding natural eye line
• Built specifically for 1-inch rifle scopes on Marlin 336, 1894, and 1895 models
• Direct receiver mounting avoids the added height and weight of a base rail
• Provides adequate hammer clearance compared to extra-low mounting options

Cons

• Does not support modern 30mm tube hunting or target scopes
• May restrict objective bell size if using optics with bells larger than 40mm

8

Talley 720336 30MM Marlin Models 336-1895 (Ex-Low) 0.41 Height

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.1
• Brand
  Talley

Key specs2

Ring Diameter

30mm

Saddle Height

0.41 inch extra-low

Pros & cons43

Pros

• Extra-low 0.41-inch height keeps 30mm scopes close to the bore for optimal cheek weld
• Accommodates modern 30mm main tube scopes on Marlin 336 and 1895 rifles
• Integrated ring-and-base system eliminates joint failure points under recoil
• Sits low enough to promote fast target acquisition on traditional comb stocks

Cons

• Extra-low 0.41-inch saddle may cause larger objective lenses to contact the barrel
• May restrict clearance around the hammer spur when cocking the lever gun
• Incompatible with traditional 1-inch scope tubes

9

Evolution Gun Works Marlin 1895, 336,444 Picatinny 0 MOA Rail

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.7
• Brand
  EGW

Key specs2

Receiver Hole Compatibility

• Marlin 336
• Marlin 1895
• Marlin 444

Incline Angle

0 MOA

Pros & cons42

Pros

• Broad rifle compatibility spanning Marlin 1895, 336, and 444 lever actions
• 0 MOA flat Picatinny rail accommodates standard hunting and woods engagement ranges
• Anodized black finish provides durable protection against field wear and moisture
• Picatinny spacing lets you position scope rings anywhere to dial in eye relief

Cons

• Requires separate scope rings to mount your riflescope
• Stacking separate rings on the rail adds overall height above the receiver comb

10

Triton Frontier Marlin 11-Slot Scope Base | 6061-T6 Aluminum Mount

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.8
• Brand
  Triton

Key specs2

Base Material

6061-T6 aluminum

Rail Capacity

11 Picatinny slots

Pros & cons32

Pros

• Machined from 6061-T6 aluminum for dependable rigidity without excess weight
• 11-slot layout gives ample mounting flexibility for ring placement or red dots
• Direct screw pattern alignment for Marlin 336, 1894, and 1895 receivers

Cons

• Base only, requiring separate rings to secure a traditional optic
• Slot profile does not provide built-in MOA cant for extreme long-range elevation

11

Talley 1" Extra Low 1-Piece Scope Mount for Marlin 1895,

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.8
• Brand
  Talley

Key specs2

Cheek Weld Profile

Extra-low height positions a 1-inch optic close to the bore to match traditional lever-action stock comb drop.

One-Piece Construction

Integrated base and lower ring assembly attaches directly to Marlin factory tapped receiver holes.

Pros & cons43

Pros

• Extra-low height provides an ideal cheek weld on traditional low-comb lever stocks
• One-piece integrated base and ring setup bolts directly to factory receiver holes
• Designed for Marlin 1895, 336, and 1894 rifles with standard 1-inch scopes
• Rigid one-piece design avoids ring-to-rail movement under brisk lever recoil

Cons

• Extremely low profile may cause large objective bells to touch the barrel
• Tight clearance above the hammer may require an offset hammer spur extension
• Will not fit scopes built on 30mm main tubes

12

Yatrouys Marlin Lever Action Picatinny Rail Mount for Scopes and

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.0
• Brand
  Yatrouys

Key specs2

Optic Attachment

Full-length Picatinny top rail accepts standard cross-slot scope rings and compact red dot sights.

Platform Fit

Sized to mount directly over factory tapped receiver holes on Marlin lever-action rifles.

Pros & cons32

Pros

• Full-length Picatinny rail allows quick installation of scopes, red dots, or prism sights
• Designed to fit Marlin lever-action factory receiver mounting holes
• Provides multiple cross-slots so you can adjust ring spacing for proper eye relief

Cons

• Manufacturer does not specify aluminum alloy grade or surface hardness
• Rail mount alone requires separate purchase of compatible scope rings

13

Monstrum Extended Picatinny Rail Mount for Marlin 336/1894/1895 Series Lever

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.1
• Brand
  Monstrum

Key specs2

Rail Extension

Forward-reaching rail design offers extra slot space to adjust scope eye relief on lever-action receivers.

Scope Clearance

Extended forward section requires verifying clearance over barrel-mounted rear iron sights.

Pros & cons33

Pros

• Extended rail overhang provides additional forward mounting space for long eye relief
• Tailored for Marlin 336, 1894, and 1895 series receiver hole configurations
• Full Picatinny cross-slot configuration accommodates various optic attachments

Cons

• Forward extension can potentially interfere with tall barrel-mounted rear iron sights
• Additional rail material adds slight forward weight compared to flush-fit bases
• Requires separate ring hardware to mount a riflescope

14

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.4
• Brand
  Monstrum

Key specs2

Leveling Feature

Integrated bubble level

Rail Standard

Picatinny and Weaver compatible

Pros & cons42

Pros

• Built-in bubble level helps eliminate rifle cant during shooting setup
• Dual-profile top surface accepts both Picatinny and Weaver style mounting rings
• Flat 0 MOA rail geometry matches standard lever-action ballistics and zero ranges
• Pre-drilled for Marlin 336, 1894, and 1895 lever-action receivers

Cons

• Rear-mounted level bubble requires clearance below your scope ocular housing
• Still requires standalone scope rings to mount a tube optic

15

Top Mount Aluminum Scope Base, Black, 90, Marlin 39A

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.1
• Brand
  WEAVER

Key specs2

Base Number

Top Mount 90

Receiver Matching Requirement

Cataloged for Marlin 39A, requiring verification of screw spacing before attempting installation on a 336 receiver.

Pros & cons33

Pros

• Lightweight aluminum construction keeps firearm top weight to a minimum
• Weaver top mount system provides a proven platform for cross-lock rings
• Black finish coordinates with traditional blued lever-action metalwork

Cons

• Cataloged specifically for Marlin 39A, so 336 owners must verify receiver hole pattern
• Single-piece or two-piece base format and slot spacing require verification
• Requires separate Weaver-compatible rings to install a scope

16

WOSUWENGE Precision CNC Machined Picatinny Rail Scope Mount for Marlin

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.7
• Brand
  WOSUWENGE

Key specs2

Multi-Rifle Compatibility

• Marlin 1895, 336, 444
• Henry lever actions
• Rossi lever actions

Finish and Metal

Aircraft grade aluminum construction finished in non-reflective matte black.

Pros & cons42

Pros

• CNC-machined from aircraft grade aluminum for consistent structural integrity
• Broad cross-platform fitment listed for Marlin 1895, 336, 444, Henry, and Rossi rifles
• Non-reflective matte black finish prevents game-spooking field glare
• Picatinny top rail provides versatile positioning for optic eye relief

Cons

• Multi-brand compatibility means receiver hole alignment must be confirmed prior to mounting
• Rail-only configuration requires adding separate scope rings to mount an optic

17

Talley 930336 1" Henry H009, H010, H014 (Low) 0.51 Height

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.1
• Brand
  Talley

Key specs2

Saddle Height

0.51 inch low

Platform Fit

Factory configured for Henry H009, H010, and H014 models, requiring hole pattern verification for Marlin rifles.

Pros & cons43

Pros

• Low 0.51-inch saddle height maintains a tight cheek weld on lever gun stocks
• Integrated ring-and-base construction eliminates separate base-to-ring screw points
• Precision machined for standard 1-inch tube riflescopes
• Offers a sleek profile that preserves the trim handling of a lever rifle

Cons

• Listing designates Henry H009, H010, and H014 fitment, requiring verification for Marlin 336 holes
• Low 0.51-inch height may create tight objective clearance with large 50mm lenses
• Incompatible with 30mm optic main tubes

Last update on 2026-10-04 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API

Will a Marlin 336 scope mount match the factory tapped receiver holes?

Yes, dedicated Marlin 336 mounts are drilled to align directly with factory tapped receiver screw holes. Models such as the Evolution Gun Works 0 MOA rail and the Triton Frontier 11-slot scope base match the factory hole spacing shared across Marlin 336, 1894, and 1895 receivers. Other rails, like the WOSUWENGE precision CNC machined rail, also fit Marlin 336, 1895, and 444 patterns while offering cross-compatibility with select Henry and Rossi rifles. Always verify your rifle's production era before ordering, as early lever guns produced without factory drilled holes require gunsmith tapping, and rimfire models like the Marlin 39A require their own dedicated base pattern.

Should I choose an integrated one-piece mount or a Picatinny rail with separate rings?

Choose an integrated one-piece mount if you want the lowest possible scope height for a natural cheek weld, or a Picatinny rail if you need adjustable ring placement. One-piece options like the Game Reaper medium or high mount and the Talley 1-inch extra-low mount bolt straight to the receiver tapped holes, removing the joint between separate bases and rings. A Picatinny rail, such as the G-Sight 0 MOA rail or Monstrum rail mount, runs multi-slot mounting positions across the receiver. That flexibility lets you shift rings forward or backward to fine-tune eye relief and preserve quick handling, similar to configurations assembled for better rifle balance.

What mount height is needed to maintain a proper cheek weld and clear the hammer?

Extra-low and low mounts keep your optic closest to the bore for a solid cheek weld, but medium or high mounts provide necessary clearance for larger ocular bells and exposed hammers. The Talley 30mm extra-low mount provides a 0.41-inch height, maintaining alignment with the low drop of a factory lever-action stock. If you need additional clearance to reach the hammer spur easily, taller options like the Game Reaper high mount or Monstrum Forester high-profile rings lift the optic higher off the receiver. When mounting your scope low, verify that you can comfortably thumb the hammer back or fit a hammer spur extension.

How do I know whether to choose a 1-inch or 30mm scope mount?

Check the outer diameter of your scope's main tube before picking a mount style. Integrated mounts and dedicated ring sets are sized for specific tube dimensions, such as the Monstrum dual ring mount and Game Reaper mounts built for 1-inch scopes, or the Talley 720336 mount designed for 30mm tubes. If you prefer to change optics later, attaching a base like the Monstrum extended Picatinny rail or the Triton Frontier mount allows you to swap between any standard 1-inch or 30mm cross-slot rings without removing the base from your receiver.

How do objective bell size and iron sights affect mount clearance?

Your scope's objective bell diameter determines the ring height required to prevent the front lens housing from touching the rifle barrel or the factory rear sight. Extra-low mounts seat small scopes close to the steel, but larger front lenses require medium or high profiles, an adjustment frequently made when positioning glass for proper barrel clearance. If your chosen optic contacts the factory rear sight leaf during positioning, you must either move up to a taller ring height or drift out the factory rear iron sight to clear the bell.

What mount materials provide the best recoil resistance on a Marlin 336?

Precision-machined aircraft-grade aluminum delivers dependable recoil resistance without weighing down the top of the rifle. Mounts such as the G-Sight 0 MOA base feature precision CNC-machined 7075 aluminum, while bases like the Triton Frontier 11-slot mount use 6061-T6 aluminum to withstand lever-action recoil impulse. To keep the assembly solid over extended shooting sessions, check receiver screw threads for debris, align the hardware cleanly with the factory holes, and verify proper screw torque according to the mount maker's instructions.