14 Best One Piece Scope Mounts of 2026 To Lock Your Zero

1

CVLIFE Cantilever Scope Mount, 30mm Scope Mounts Offset Dual Ring

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.9
• Brand
  CVLIFE

Key specs2

Scope Tube Sizing

30mm main tubes

Cantilever Design

The forward offset positions 30mm rifle scopes forward on flat-top receivers, allowing comfortable eye relief without craning your neck.

Pros & cons32

Pros

• One-piece dual-ring base keeps optic rings aligned without separate ring alignment tools
• Forward cantilever offset pushes 30mm optics ahead on flat-top receivers for proper eye relief
• Lightweight aluminum build reduces overall rifle weight while maintaining rigid optic support

Cons

• Only fits 30mm scope tubes and will not seat smaller 1-inch optics without adapters
• Specific receiver rail clamp width and height are not listed and must be confirmed

2

CVLIFE Cantilever Scope Mount - 1 inch Offset Dual Ring

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.3
• Brand
  CVLIFE

Key specs2

Rail Compatibility

Picatinny rails

Eye Relief Layout

The forward cantilever offset helps place standard 1-inch scopes in front of the receiver to establish proper shooting posture.

Pros & cons32

Pros

• Dedicated 1-inch dual ring layout provides secure clamping for standard 1-inch scope tubes
• Forward offset dual-ring geometry establishes eye relief on flat-top Picatinny platforms
• One-piece rigid structure eliminates scope tube twisting common with mismatched two-piece rings

Cons

• Incompatible with 30mm or 34mm optics due to fixed 1-inch ring diameter
• Mount height and overall weight are not specified in the product data

3

DISCOVERYOPT Heavy Duty 34mm Picatinny One Piece Scope Mount with

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.1
• Brand
  DISCOVERYOPT

Key specs2

Optical Centerline

1.18-inch center height

Auxiliary Accessory Rail

Includes an integrated top rail section on the cantilever structure for attaching backup optics or shooting accessories.

Pros & cons32

Pros

• Heavy-duty one-piece construction is sized specifically for larger 34mm tactical scope tubes
• Integrated cantilever top rail allows direct attachment of auxiliary red dots or accessories
• Factory 1.18-inch center height delivers low clearance over Picatinny receiver rails

Cons

• Low 1.18-inch centerline height may cause large objective bells to contact rifle barrels
• Exclusively fits 34mm main tubes, making it unusable for 1-inch or 30mm scopes

4

Monstrum Deadlock Series Dual Ring Scope Mount | 1 inch

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.7
• Brand
  Monstrum

Key specs2

Cantilever Offset

1-inch forward offset

Deadlock Ring Setup

Combines a 1-inch forward offset with 30mm rings to push tactical optics forward on the receiver for optimal cheek weld.

Pros & cons32

Pros

• Built with 1 inch of forward cantilever offset to establish clean eye relief on modern rifles
• Engineered specifically to hold 30mm main tubes securely within rigid dual rings
• One-piece Deadlock chassis prevents uneven ring torque and optic tube twisting

Cons

• Fixed 1-inch offset may not provide enough forward throw for extreme eye relief scopes
• Specific rail attachment interface is not detailed in the product listing

5

Burris Optics P.E.P.R. Scope Mount, Includes Both Smooth and Picatinny

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.1
• Brand
  Burris

Key specs2

Ring Top Versatility

• Includes smooth ring top caps
• Includes Picatinny-topped ring caps
• Allows mounting backup reflex sights

Scope Tube Sizing

30mm diameter

Pros & cons32

Pros

• Supplied with interchangeable smooth and Picatinny-topped ring caps for mounting top accessories
• Proper Eye Position Ready design provides forward scope placement on flat-top receivers
• Standard attachment system secures 30mm scopes under heavy centerfire rifle recoil

Cons

• Cannot be used with 1-inch or 34mm rifle scopes due to fixed 30mm ring dimensions
• Total assembly weight with Picatinny ring tops is not stated in the listing

6

Monstrum Deadlock Series Dual Ring Scope Mount | Inline Rings

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.9
• Brand
  Monstrum

Key specs2

Ring Alignment

Inline ring configuration

Receiver Application

Inline orientation works well for bolt-action rifles and continuous rails where forward cantilever projection is not required.

Pros & cons32

Pros

• Inline dual-ring layout maintains a direct vertical alignment over the receiver without forward offset
• One-piece Deadlock structure eliminates ring misalignments that cause scope marring
• Standard 1-inch diameter rings secure popular hunting and rimfire optics

Cons

• Lack of forward cantilever offset limits eye relief on flat-top tactical rifle receivers
• Compatible only with 1-inch tubes and cannot accept 30mm optics

7

Vortex Sport Riflescope Rings (1" - High (1.1"))

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.9
• Brand
  Vortex

Key specs2

Profile Height

High profile (1.1 inches)

Objective Bell Clearance

The 1.1-inch high profile gives extra clearance above the barrel for scopes with larger front objective lenses.

Pros & cons32

Pros

• High profile 1.1-inch height provides extra clearance for scopes with larger objective bells
• Precision sizing holds 1-inch scope tubes securely in place
• Elevated profile helps clear rear iron sights or heavy barrel contours

Cons

• Separate ring design requires careful manual alignment during receiver installation
• Not suitable for 30mm or 34mm optics

8

UTG 1PC Medium Profile Airgun Mount with Stop Pin, 1"

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.3
• Brand
  UTG

Key specs2

Recoil Retention

Integrated recoil stop pin

Airgun Optimization

Engineered with a built-in stop pin to halt longitudinal base slip along airgun dovetail grooves during repeated shooting cycles.

Pros & cons32

Pros

• Integrated recoil stop pin prevents scope creep caused by bidirectional airgun recoil
• Rigid one-piece base keeps 1-inch scope tubes straight without pinching
• Medium profile height balances cheek weld with moderate objective lens clearance

Cons

• Designed specifically for airgun rails and will not clamp onto standard Picatinny rails
• Sized only for 1-inch scope tubes, excluding 30mm optics

9

Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount |

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.6
• Brand
  Monstrum

Key specs2

Mount Profile

Slim profile offset cantilever

Picatinny Attachment

Fastens directly onto Picatinny rails while shifting the optic forward to achieve comfortable eye positioning.

Pros & cons32

Pros

• Slim profile cantilever structure pushes 1-inch optics forward for natural eye relief
• Lightweight profile minimizes extra bulk on top of the receiver
• Dedicated Picatinny clamping rail provides a solid mount across flat-top receivers

Cons

• Does not accommodate 30mm or 34mm scopes due to fixed 1-inch rings
• Slim profile frame provides less ring surface area than wide heavy-duty tactical mounts

10

CVLIFE Cantilever Scope Mounts 1 inch, Offset Dual Ring One-Piece

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.2
• Brand
  CVLIFE

Key specs2

Material Build

Lightweight aluminum

Forward Offset Benefit

Dual rings set on a forward cantilever bridge allow shooters to position 1-inch scopes for quick target acquisition.

Pros & cons32

Pros

• Lightweight aluminum construction keeps rifle setup agile while locking scope alignment
• Offset dual-ring design pushes 1-inch optics forward to prevent cramped shooting posture
• One-piece base prevents optic tube binding associated with misaligned separate rings

Cons

• Cannot fit 30mm optic main tubes
• Base clamp bolt torque ratings and center height are not specified in product data

11

MIZUGIWA One Piece High Profile Magnum Airgun Scope Mount with

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.1
• Brand
  MIZUGIWA

Key specs2

Magnum Airgun Rating

Equipped with a vertical recoil stop pin to counteract heavy forward and reverse piston recoil on magnum airguns.

Profile Height

High profile

Pros & cons32

Pros

• Built-in stop pin resists severe bidirectional recoil on magnum-powered air rifles
• High profile architecture accommodates scopes with wide objective lens bells
• One-piece continuous base provides superior rigidity over two-piece airgun rings

Cons

• Tube diameter sizing is not listed in product data and must be verified before purchase
• High profile configuration may require an elevated cheek riser for consistent eye alignment

12

Monstrum Deadlock Series Dual Ring Scope Mount | 1 inch

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  Monstrum

Key specs2

Cantilever Offset

1-inch offset cantilever

Deadlock Tube Sizing

Engineered specifically for 1-inch main tubes, offsetting the optic forward by one inch to maintain natural head position.

Pros & cons32

Pros

• Deadlock one-piece body holds 1-inch scope tubes in perfect parallel alignment
• Provides 1 inch of forward cantilever offset for correct eye placement on flat-top platforms
• Dual ring clamping distributes holding pressure evenly across the optic tube

Cons

• Cannot be used with 30mm or 34mm scope tubes
• Centerline height above the rail is not listed in the provided data

13

Leupold Mark Scope Mount

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.0
• Brand
  Leupold

Key specs2

Platform Series

Leupold Mark series

Fitment Verification

Specific ring diameter and rail compatibility vary across the Mark series and must be confirmed on the packaging.

Pros & cons32

Pros

• One-piece Mark series architecture provides rigid platform stability for mounted rifle optics
• Single-base design prevents scope tube torsion and keeps zero locked under recoil
• Leupold manufacturing standards ensure precise machining tolerances across the mount

Cons

• Specific ring diameter, height, and offset are not detailed and must be verified prior to ordering
• Compatible receiver rail standard is unlisted in the provided product data

14

Monstrum Precision Scope Rings | 1 inch Diameter | Picatinny

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.8
• Brand
  Monstrum

Key specs2

Ring Height Specification

1.00-inch height

Rail Interface

Picatinny rails

Pros & cons32

Pros

• Direct Picatinny interface locks securely onto receiver rail slots
• Factory 1.00-inch height establishes a balanced centerline for mid-sized scope objectives
• Precision-machined 1-inch diameter rings secure matching rifle optic tubes

Cons

• Dual-ring configuration lacks a solid one-piece bridge and requires careful individual alignment
• Not compatible with 30mm or 34mm main tubes

Last update on 2026-09-27 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API

When do you need an offset cantilever scope mount instead of an inline base?

You need an offset cantilever scope mount when mounting an optic on a flat-top rifle receiver where you must push the scope forward for proper eye relief. Cantilever designs, such as a 1 inch offset dual ring scope mount, position the front ring past the receiver rail without requiring you to bridge your optic onto the handguard. This forward placement keeps the entire base anchored to the rigid receiver while providing the eye relief needed for a comfortable shooting posture. Inline rings work best on continuous rails or bolt-action receivers where optic placement does not crowd your cheek weld.

How do you match a one-piece mount to your scope tube diameter?

You must match the mount ring diameter exactly to your optic main tube, which comes in 1 inch, 30mm, or 34mm. Scope rings are sized for specific tube dimensions, meaning an oversized ring will fail to clamp securely while an undersized ring will crush or scratch the tube. Selecting a one-piece mount made of lightweight aluminum machined for your specific 1 inch, 30mm, or 34mm tube diameter ensures uniform clamping tension without binding internal elevation assemblies.

Will a one-piece mount fit both Picatinny rails and airgun receiver grooves?

No, Picatinny scope mounts and dedicated airgun mounts use different rail clamp profiles. A Picatinny one-piece mount relies on crossbolts that seat into standardized rail slots to withstand recoil impulses. Airgun mounts clamp onto narrow receiver dovetails and often include an integrated stop pin to resist bi-directional piston recoil. When pairing a compact optic such as the Hawke Airmax 2-7x32 AO with a spring-piston rifle, verify that your mount matches the receiver grooving rather than a standard Picatinny rail.

How do you verify mount center height to clear your scope objective bell?

You determine barrel clearance by comparing the mount center height against the outer diameter of your scope objective bell. Profiles vary from medium profile and high profile designs up to mounts with a 1.18 inch center height. To confirm clearance, divide the outer bell diameter by two and ensure that number is less than the center height above the rifle receiver. For a large optic like the Athlon Optics Talos 6-24x50, choosing adequate mount height keeps the wide bell housing from contacting the rifle barrel or rail.

How does a stop pin prevent airgun scope creep?

A stop pin acts as a physical recoil anchor that locks the mount body into an airgun receiver recess. Spring-piston airguns generate sharp forward and reverse recoil forces that can cause friction-clamped bases to slip along the receiver grooves. Mounting platforms featuring an integrated stop pin seat directly into the receiver stop hole, creating a rigid block that prevents the base from sliding backward and keeps your zero intact over prolonged firing.

What is the advantage of interchangeable smooth and Picatinny ring tops?

Interchangeable ring tops let you switch between a streamlined profile and an accessory mounting rail directly above your optic. A mount supplied with both smooth and Picatinny ring tops allows you to attach a secondary red dot sight or illuminator on top of your primary scope rings. When you do not need auxiliary attachments, using the smooth ring tops reduces overall profile bulk and prevents snagging on rifle cases or field brush.