11 Sig Mcx Spear Lt of 2026 For Secure Wall Mounting

1

Hammy3DPrints Display Stand for Various Firearms - Pistols, AK, AR,

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.6
• Brand
  Hammy3DPrints

Key specs2

Surface Placement

Freestanding Tabletop or Bench

Storage Method

Holds the Sig MCX Spear LT upright on flat horizontal surfaces like armorer benches or safe shelving without wall hardware.

Pros & cons32

Pros

• Freestanding tabletop profile eliminates the need to drill into walls or safe interiors
• Configured specifically for the Sig MCX and Spear LT lower receiver geometry
• Allows quick placement and retrieval on workbenches, desks, or vault shelves

Cons

• Occupies flat bench space rather than utilizing open vertical wall area
• Lacks anchoring hardware to secure the stand against heavy bumps or tip-overs

2

Hammy3DPrints Mount for Sig MCX/Spear LT - Wall | Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.9
• Brand
  Hammy3DPrints

Key specs2

Mounting Interface

Drywall Anchors with Screws

Installation Hardware

Supplied with drywall-specific anchors, allowing mounting across open wall expanses without requiring stud alignment.

Pros & cons32

Pros

• Bundled with dedicated drywall anchors and screws for placement anywhere on open drywall
• Direct wall-mount configuration clears shelf and floor space in gun rooms
• Shaped specifically to match the Sig MCX and Spear LT platform

Cons

• Drywall anchor weight capacity is lower than direct-to-stud anchoring
• Requires drilling holes into sheetrock that require patching if relocated

3

Hammy3DPrints Display Stand for Sig MCX/Spear LT | Rifle Holder

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.1
• Brand
  Hammy3DPrints

Key specs2

Surface Placement

Shelf or Armorer Table

Stand Structure

Built exclusively for the Sig MCX and Spear LT receiver footprint to keep the rifle upright without wall fasteners.

Pros & cons32

Pros

• Dedicated Sig MCX and Spear LT design provides a tailored upright display fit
• Zero installation required, keeping walls and furniture free from drill holes
• Ideal for display cases, safe shelves, or tabletop cleaning and maintenance

Cons

• Unanchored base requires placement on a stable, level surface away from foot traffic
• Does not support vertical wall presentation or panel organization

4

Hammy3DPrints Mount for Sig MCX/Spear LT - Secure It/Akro Mils

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.1
• Brand
  Hammy3DPrints

Key specs2

Panel Compatibility

SecureIt and Akro Mils Louver Grid

Modular Integration

Hooks directly into louvered gun storage systems, enabling quick layout changes without drilling new holes.

Pros & cons32

Pros

• Form-fitted to hook securely into SecureIt and Akro Mils louvered storage panels
• Allows modular repositioning across the panel grid without tools or wall damage
• Dedicated receiver cradle shaped for the Sig MCX and Spear LT profile

Cons

• Incompatible with standard drywall, wood studs, or slatwall channels
• Requires an existing SecureIt or Akro Mils louvered metal backer system

5

Hammy3DPrints Mount for Sig MCX/Spear LT - GallowTech | Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.6
• Brand
  Hammy3DPrints

Key specs2

Panel Compatibility

GallowTech Modular Wall Panels

Wall Attachment Style

Designed specifically with rear tabs that seat into GallowTech slot patterns for secure vertical retention.

Pros & cons32

Pros

• Precision tabs lock directly into proprietary GallowTech wall panel slots
• Keeps the Spear LT securely suspended while maintaining a flush vertical alignment
• Receiver interface matches the specific Sig MCX and Spear LT lower contours

Cons

• Usable only on GallowTech panel systems, ruling out standard slatwall or pegboard
• Panel layout limits horizontal adjustment to GallowTech slot spacing increments

6

Hammy3DPrints Mount for Sig MCX/Spear LT - Wall | Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.5
• Brand
  Hammy3DPrints

Key specs2

Mounting Interface

Direct Stud with Self-Tapping Screws

Fastener Requirement

Includes self-tapping stud screws to drive directly into structural wall timber for rigid load support.

Pros & cons32

Pros

• Included self-tapping screws provide maximum holding strength directly into wooden studs
• High load security minimizes any risk of the mount pulling loose over time
• Contoured receiver cradle keeps the Sig MCX Spear LT steady and flush against the wall

Cons

• Mounting location is strictly constrained by the position of your wall studs
• Screws cannot be used in hollow drywall without separate specialized anchors

7

Hammy3DPrints Mount for Sig MCX/Spear LT - Gridwall | Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  Hammy3DPrints

Key specs2

Display Orientation

Facing Left

Wire Grid Attachment

Hooks onto standard wire gridwall displays, orienting the Sig MCX Spear LT with the muzzle pointing left.

Pros & cons32

Pros

• Built specifically to clamp onto commercial wire gridwall panels
• Facing-left orientation fits room layouts requiring the barrel to point left
• Direct hook-in design allows quick reorganization along the wire grid

Cons

• Facing direction is fixed to the left and cannot be reversed to point right
• Will not fit slatwall, louvered panels, or flat drywall surfaces

8

Hammy3DPrints Mount for Sig MCX/Spear LT - Slatwall | Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.8
• Brand
  Hammy3DPrints

Key specs2

Slatwall Track Profile

StoreWall Slatwall (Facing Right)

Channel Fit

Specifically grooved for StoreWall slatwall panels, orienting the rifle to face right along the wall.

Pros & cons32

Pros

• Precision-molded back profile aligns with StoreWall brand slatwall grooves
• Facing-right orientation accommodates rooms with right-side display lines
• Supports fast slotting and repositioning without requiring screwdrivers or drill bits

Cons

• Profile is tailored to StoreWall channels and may fit loosely on other slatwall brands
• Fixed right-facing position cannot be swapped for a leftward display

9

Hammy3DPrints Mount for Sig MCX/Spear LT - Slatwall | Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.4
• Brand
  Hammy3DPrints

Key specs2

Slatwall Track Profile

Dakota Slatwall (Without Metal Track)

Slot Specification

Molded to fit the unlined channel dimensions of Dakota slatwall, presenting the Spear LT facing right.

Pros & cons32

Pros

• Custom rear profile engages standard unlined Dakota slatwall channels cleanly
• Points the rifle toward the right for clean safe or room sightlines
• Tool-free installation allows easy sliding and repositioning across slat runs

Cons

• Will not fit Dakota panels equipped with metal track reinforcement inserts
• Fixed right-hand orientation provides no option to face the rifle left

10

Hammy3DPrints Mount for Sig MCX/Spear LT - Slatwall | Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.5
• Brand
  Hammy3DPrints

Key specs2

Track Specification

Dakota Slatwall (With Metal Track Insert)

Reinforced Track Fit

Built to match Dakota panels fitted with metal track inserts, holding the rifle pointing right.

Pros & cons32

Pros

• Engineered specifically to clear and seat into Dakota slatwall tracks with metal reinforcement inserts
• Metal-track compatibility supports heavier setups without cracking slat channels
• Facing-right orientation creates a consistent display angle for rightward view paths

Cons

• Rear hook geometry will not sit flush in unlined Dakota slatwall tracks
• Fixed right-facing angle cannot be flipped for left-facing wall layouts

11

Hammy3DPrints Mount for Sig MCX/Spear LT - Gridwall | Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.3
• Brand
  Hammy3DPrints

Key specs2

Display Orientation

Facing Right

Gridwall Integration

Seats into wire grid systems to hold the Sig MCX Spear LT securely with the muzzle oriented to the right.

Pros & cons32

Pros

• Secures firmly to wire gridwall panels without needing extra fasteners or clips
• Facing-right orientation supports rightward visual flow across your wall display
• Custom Sig MCX Spear LT interface holds the firearm steady against wire panels

Cons

• Fixed rightward presentation cannot be modified to point toward the left
• Incompatible with slatwall tracks, GallowTech panels, or direct drywall mounts

Last update on 2026-09-15 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API

Does a dedicated mount seat the Sig MCX Spear LT firmly without wobble?

Yes. A mount shaped specifically for the Sig MCX Spear LT holds the receiver firmly because it matches the platform's exact contours. Generic rifle brackets often allow shifting or forward tilt because the Spear LT receiver and handguard dimensions differ from standard mil-spec profiles. Choosing a dedicated receiver mount keeps the rifle upright, balanced, and seated flush against the surface. Always check your optic overhang and handguard accessory clearance against your wall clearance before final installation.

What hardware is required to install a Sig MCX Spear LT mount on drywall or studs?

Your wall material determines the exact fastener type needed for safe support. Dedicated wall mounts for the Sig MCX Spear LT ship with either self-tapping stud screws or drywall anchors with screws. Fastening directly into a solid wooden stud with self-tapping screws provides the strongest hold for a fully equipped rifle setup. If you must mount onto hollow drywall where no stud is accessible, use the drywall anchors with screws to spread the load properly and prevent wall damage.

How do you choose between a left-facing and right-facing mount?

Your room layout, safe door clearance, and lighting angles dictate whether a left-facing or right-facing orientation is best. Purpose-built gridwall and slatwall mounts come in distinct facing left and facing right configurations. If you stage the rifle alongside a secondary setup kept for reliable home defense, choose the direction that directs the muzzle toward safe wall space while leaving the magazine release and optic controls unobstructed.

Which mounting brackets fit GallowTech or SecureIt modular panels?

You must select a bracket designed precisely for your specific modular panel backer. Specialized mounts are built specifically for GallowTech slot systems, while separate brackets fit SecureIt and Akro Mils louvered panels. Because vertical slot spacing and tab depth differ across modular systems, generic brackets will rattle or fail to seat. Verify the manufacturer stamp or slot pattern on your metal panel wall before selecting your mount.

How do you match a slatwall mount to Store Wall or Dakota tracks?

Identify the exact slatwall track profile and whether it contains a metal reinforcement before buying. Slatwall mounts for the Sig MCX Spear LT are produced in separate models for standard Store Wall, Dakota panels without a metal track, and Dakota panels with a metal track insert. A mount cut for bare grooves will not seat properly inside a channel reinforced with metal, so inspect the interior lip of your slatwall track to ensure a snug fit.

When should you choose a freestanding bench display stand over a wall mount?

A freestanding display stand works best when you need temporary staging on a workbench, desk, or safe shelf without drilling holes. Dedicated tabletop stands seat the rifle upright via the lower receiver, keeping it elevated and balanced during cleaning or inspection. If you also maintain compact platforms for CQB skirmishes, a portable display stand lets you reposition firearms quickly without damaging walls or modifying your primary storage layout.