9 Umarex Gauntlet Wood Stock of 2026 For Better Balance

1

Classic Style A2 Screw with Stock,

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  10.0
• Brand
  Eastern Tactical Supply

Key specs2

Mounting Interface

A2 rifle-length buffer extension required

Platform Fitment Reality

Designed strictly for firearm buffer receiver extensions, this fixed stock cannot bolt directly to the synthetic stock screw holes or air cylinder chassis of an Umarex Gauntlet.

Pros & cons42

Pros

• Matte black finish matches tactical air rifle receivers and barrels
• Fixed A2 rifle-length profile provides a stable shoulder pocket
• Listed lifetime warranty backs manufacturer construction quality
• One-pound listed weight adds rear mass to offset front-heavy air tanks

Cons

• Requires an A2 extension buffer system rather than fitting factory Gauntlet screw mounts
• Synthetic polymer build does not provide the hardwood finish Gauntlet owners seek

2

Crosman 1377 Custom Shoulder Stock

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.2
• Brand
  Crosman

Key specs2

Intended Airgun Frame

Crosman 1377 and 1322 pump air pistols

Receiver Mounting Limit

Engineered to replace grip panels on specific Crosman pump airguns, leaving no compatible mounting points or clearances for a PCP air reservoir.

Pros & cons32

Pros

• Converts compatible airgun frames into shoulder-mounted carbines
• Lightweight skeletal frame adds shoulder contact without heavy bulk
• Compact form factor provides steady aiming support for target shooting

Cons

• Built specifically for Crosman pump pistol frames and cannot bolt onto a Gauntlet receiver
• Synthetic molded construction offers no wood grain aesthetics or substantial rear counterbalance

3

Super Deal! Spanish Cetme Wood Stock Set. Northridge International INC.

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  N/A

Key specs2

Stock Material

Authentic hardwood lumber

Custom Inletting Demands

Because the wood is inletted for military firearm components, fitting it to an Umarex Gauntlet requires extensive machining to clear the regulated air cylinder, valve body, and barrel shroud.

Pros & cons32

Pros

• Genuine brown wood construction provides classic hardwood texture and grain
• Sturdy surplus military furniture offers solid wood density for counterbalancing
• Full stock set supplies authentic hardwood material for custom woodworking projects

Cons

• Pre-inletted for Spanish CETME firearm receivers and will not drop onto a Gauntlet PCP
• Modifying the wood to fit the Gauntlet air tube and action requires advanced custom milling

4

KEEPER MG Recoil Pad for Shotgun - Gel, Slip-On Rifle

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  KEEPER MG

Key specs2

Stock Attachment Method

Slip-on sleeve with elastic fabric

Stock Stabilization Role

While it does not replace the factory plastic stock with hardwood, the gel padding improves grip against the shoulder and extends length of pull on the slick factory butt.

Pros & cons42

Pros

• Visco-Elastic gel core cushions the shoulder pocket for steady bench shooting
• Universal slip-on design installs on synthetic and wooden rifle stocks without drilling
• Flexible double-stitched fabric construction withstands routine outdoor range use
• Adds rear padding to improve stability on slick synthetic airgun buttplates

Cons

• Acts as a slip-on pad accessory rather than replacing the synthetic Gauntlet stock body
• Adds rear cushion but cannot resolve hollow balance inside the factory synthetic forearm

5

Hogue OverMolded Rubber Shotgun Stock for Mossberg 500 with a

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  Hogue

Key specs2

Length of Pull Specification

12-inch compact LOP

Shotgun Receiver Compatibility

Fits Mossberg 500, 590A1, and Maverick 88 shotguns. It lacks any inletting or bolt patterns to mate with a PCP air rifle receiver or reservoir.

Pros & cons42

Pros

• OverMolded rubber exterior provides a secure non-slip grip in wet weather
• Compact 12-inch length of pull creates a manageable reach for shorter shooting stances
• Twenty-ounce weight adds rear heft that helps tame front-heavy barrel balance
• Durable synthetic core resists impact and field wear

Cons

• Engineered solely for Mossberg shotgun receivers and clone frames, not air rifles
• Direct bolt-on installation onto an Umarex Gauntlet is impossible without a custom adapter

6

Lightweight Fixed Stock, Black

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.8
• Brand
  Generic

Key specs2

Tube Diameter Requirement

1.2-inch buffer tube only

Chassis Attachment Limit

Requires a dedicated 1.2-inch buffer tube mount, meaning Gauntlet owners cannot install it unless using an aftermarket rear buffer adapter.

Pros & cons42

Pros

• Reinforced polymer construction keeps total weight down while resisting flexing
• Slim profile cheek weld assists with consistent eye alignment behind optics
• Rollover design facilitates clean shoulder transitions during field shooting
• Manufacturer lists a 1-year warranty covering material defects

Cons

• Built solely for a 1.2-inch buffer tube and cannot attach directly to a Gauntlet chassis
• Synthetic black polymer does not satisfy the demand for traditional wood furniture

7

Hogue OverMolded Rubber Shotgun Stock for Mossberg 500 (12, 16,

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.8
• Brand
  Hogue

Key specs2

Exterior Material

OverMolded synthetic rubber

Firearm Receiver Focus

Built for Mossberg 500 series shotguns, this stock will not fit the Gauntlet receiver, leaving Gauntlet owners needing specialized custom woodwork instead.

Pros & cons42

Pros

• OverMolded rubber coating delivers superior non-slip control during all-weather use
• Weather and impact-resistant synthetic construction withstands heavy outdoor handling
• Recoil-absorbing design provides solid shoulder stability for precision shooting
• Listed 15-ounce weight provides substantial counterweight mass at the rear

Cons

• Designed exclusively for Mossberg shotgun receivers and cannot fit a PCP airgun action
• Solid rubber-coated synthetic construction offers no traditional wood appearance

8

OAREA Hunting Rifle Rubber Recoil Pad Slip-On Butt Stock Shotgun

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.6
• Brand
  OAREA

Key specs2

Pad Material

Thermo-Plastic-Rubber (TPR)

Non-Invasive Installation

Slides directly over an existing air rifle buttplate without tools, giving better shoulder contact if you keep the synthetic chassis.

Pros & cons42

Pros

• Thermo-Plastic-Rubber material cushions the buttstock without permanent rifle alterations
• Universal slip-on design stretches over most standard synthetic and wood buttplates
• Compact 4.9 by 1.18 by 3.14 inch dimensions add minimal bulk to the rear
• Provides immediate traction against the shoulder to reduce slippage on synthetic stocks

Cons

• Does not replace the hollow synthetic factory stock or change rifle aesthetics to wood
• Provides butt cushioning but does not counter the heavy forward pull of a Gauntlet air bottle

9

XNDSEVO - Fixed Stock for Pica-Rail Mounts with Cheek Riser

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.6
• Brand
  xndsevo

Key specs2

Rail Mounting Standard

Picatinny rail with dual M5 screws

Rear Interface Requirement

Standard Umarex Gauntlet synthetic stocks do not feature a rear vertical Picatinny rail, requiring a custom rear chassis block to mount this nylon stock.

Pros & cons42

Pros

• High-grade nylon construction offers a solid and lightweight rear support
• Integrated slide cheek pad allows fine-tuning for eye alignment with elevated scopes
• Dual M5 screw mounting clamps firmly onto standard Picatinny interface rails
• Backed by a 1-year manufacturer warranty for structural reliability

Cons

• Requires a rear Picatinny mounting rail that standard Umarex Gauntlet rifles do not feature
• Tactical nylon design lacks the classic look, warmth, and feel of real hardwood

Last update on 2026-10-11 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API

Does Umarex offer an original factory wood stock for the Gauntlet PCP air rifle?

Umarex built the Gauntlet around an all-weather synthetic stock, so factory-direct hardwood options are not standard catalog replacements. Factory configurations focus on synthetic furniture to accommodate the forward high-pressure pneumatic tank and pressure gauge. If you prefer a wood build, you must verify aftermarket inletting from custom stock makers or adapt dedicated airgun stock blanks rather than looking for an OEM replacement part.

Can surplus rifle furniture like a Spanish Cetme wood stock set fit the Gauntlet action?

No, surplus firearm furniture will not fit an Umarex Gauntlet without destructive modifications. Products such as a Spanish Cetme wood stock set are shaped exclusively for military firearm receivers and lack the interior channel required for a PCP air reservoir. Custom inletting a surplus blank to clear the pneumatic air cylinder and Gauntlet receiver screws risks removing too much material, which compromises the structural integrity of the wood.

Can you mount aftermarket shotgun or AR-pattern stocks directly to the Gauntlet?

No, standard firearm stocks cannot bolt directly to the factory Gauntlet receiver. A fixed stock designed for a 1.2-inch buffer tube or a classic A2 fixed stock requires a dedicated threaded receiver extension, while shotgun stocks engineered for Mossberg 500 models bolt directly to flat firearm receivers. If you want a more modular setup with AR-style attachments or rail-mounted ergonomics, you may want to look into a dedicated tactical air rifle platform engineered specifically for modular rear stocks.

What accessories help balance the factory synthetic stock if a wood stock is unavailable?

Adding rear weight and comb height through slip-on accessories effectively counteracts the front-heavy feel of the air cylinder. A slip-on rubber recoil pad, such as the OAREA butt protector or a KEEPER MG gel pad, installs easily over the synthetic butt plate to add rearward mass and shooting stability. You can also pair these pads with an adjustable cheek riser to improve eye alignment when using raised optic mounts on target competition or varmint hunting setups.

Can a Picatinny-mounted stock attach to the Umarex Gauntlet chassis?

Only if your Gauntlet is equipped with an aftermarket rear Picatinny adapter. A stock like the XNDSEVO fixed stock secures using two M5 screws on standard Picatinny rails, but the factory synthetic Gauntlet body does not feature a rear mounting rail. You must verify whether your receiver has an adapter installed before attempting to mount rail-attached buttstocks with built-in cheek risers.

What clearances must you verify before ordering a custom wood stock for your Gauntlet?

You must confirm exact clearance for the regulated PCP air reservoir, the fill port, and the receiver action screws. The Gauntlet places a substantial high-pressure bottle beneath the barrel shroud, which requires a deep, uninterrupted forend channel. Always measure your bottle diameter, check gauge access points, and verify action screw locations against your factory synthetic chassis before committing to custom hardwood inletting.