8 Umarex Marlin Wood of 2026 For Proper Fit

1

Gotical Picatinny Rail Mount for for Marlin 1895/336/375/444 Series Lever

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  10.0
• Brand
  Gotical

Key specs2

Optic Mounting Platform

The 5.1-inch rail features full-length cross slots for mounting standard Picatinny or Weaver rings. Check receiver screw hole spacing on your rifle prior to installation to confirm alignment.

Iron Sight Access

Deep U-cut channel preserves factory sight view

Pros & cons32

Pros

• Aircraft grade aluminum construction with hard anodized matte black finish ensures long-term rigidity
• Full-length 12-slot Picatinny layout provides 5.1 inches of rail space for flexible scope ring positioning
• Deep U-cut center channel maintains a clear line of sight to factory iron sights beneath the rail

Cons

• Designed around Marlin centerfire receivers, requiring verification of receiver hole spacing before airgun use
• Does not include mounting hardware specifications for air rifle receiver threads

2

RWS Lock Down Scope Mount for Air Rifles, 1-Inch Rings

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  Umarex

Key specs2

Scope Ring Compatibility

1-inch diameter rings for standard airgun optics

Hammer Clearance Note

Mounting 1-inch optics on lever-action rifles requires verifying clearance beneath the eyepiece so your thumb can comfortably cock and lower the hammer.

Pros & cons32

Pros

• One-piece rigid base design helps prevent optic shift under air rifle spring and firing vibration
• Built-in 1-inch ring diameter accommodates standard vintage and modern airgun scopes
• Engineered specifically for air rifle platforms to secure optics without slipping

Cons

• Rail base clamping dimensions must be verified against your specific receiver dovetail or rail width
• Fixed ring height requires checking clearance above the cocking hammer on lever actions

3

Magpul ELG M-LOK Fixed Stock for Marlin 1895/1894/336, Flat Dark

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  Magpul

Key specs2

Stock Attachment Type

Designed strictly for Marlin 1895, 1894, and 336 centerfire rifle geometry. Airgun owners must verify receiver inletting and internal tang dimensions before purchasing.

Accessory Support

• Multiple M-LOK slots for mounting lights or rails
• Integrated storage compartment for small gear
• Accepts standard Magpul QD sling cups

Pros & cons32

Pros

• Integrated internal storage compartment provides convenient space for extra accessories in the field
• Built-in M-LOK slots allow direct attachment of modern tactical accessories to a lever action
• Multiple sling mounting points support quick-detach QD cups for field carry

Cons

• Engineered specifically for Marlin 1895, 1894, and 336 firearm receivers rather than airguns
• Internal receiver tang and air reservoir clearance must be confirmed before attempting fitment

4

Umarex .177 Caliber Pellet Air Gun Rotary Magazine (Pack of

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  Umarex

Key specs2

Magazine Capacity and Caliber

8-shot rotary cylinder for .177 caliber pellets

Lever Action Compatibility

Manufactured from aluminum in Germany, these 8-round rotary magazines fit directly into the Umarex Lever Action Rifle action for smooth cycling.

Pros & cons32

Pros

• German-crafted aluminum construction delivers dependable feeding through repeated lever cycling
• Direct compatibility with the Umarex Lever Action Rifle and Walther .177 pellet platforms
• Pack of three 8-shot rotary cylinders allows fast reloads during target practice

Cons

• Restricted strictly to .177 caliber pellets and will not chamber steel BBs or .22 pellets
• Shallow rotary chambers require confirming overall pellet length to prevent cylinder jamming

5

LimbSaver 10806 AirTech Precision-Fit Recoil Pad for Ithaca, Mossberg, Remington,

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.0
• Brand
  LimbSaver

Key specs2

Buttstock Fitment Dimensions

Fits stock profiles measuring 4.7 x 1.6 inches

Vibration Dampening Material

Proprietary NAVCOM rubber dissipates recoil and mechanical vibration while maintaining traction against outerwear.

Pros & cons32

Pros

• NAVCOM material dampens vibration and softens felt shoulder pressure
• Non-slip surface provides stable shoulder placement in wet or cold weather conditions
• Built-in atmospheric chambers dissipate energy across the entire buttpad surface

Cons

• Pre-fit template requires exact buttstock dimensions of 4.7 by 1.6 inches to mount flush
• Screw hole placement is designed for firearm stocks and requires verification on air rifles

6

Umarex .177 and .22 Caliber Air Gun Cleaning Kit -

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.8
• Brand
  Umarex

Key specs2

Bore Maintenance Kit

• Dedicated cleaning rod with mops and brushes
• Bore cleaning pellets for .177 and .22 calibers
• Included driver set for sight and mount screws

Caliber Support

Dual caliber setup for .177 and .22 barrels

Pros & cons32

Pros

• Multi-caliber design includes rods, brushes, and mops for both .177 and .22 caliber air rifles
• Includes dedicated cleaning pellets to clear bore residue without abrasive wire scratching
• Comes with a compact driver set to assist with basic maintenance and fastener adjustments

Cons

• Listing does not specify total rod length, so barrel clearance must be verified on long rifles
• Soft cleaning pellets are single-use consumables that will require separate refills over time

7

LimbSaver 10102 Classic Precision-Fit Recoil Pad for Marlin and Remington

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.6
• Brand
  LimbSaver

Key specs2

Recoil Pad Thickness

0.3-inch low profile to preserve length of pull

Stock Profile Verification

Designed for specific Marlin and Remington buttstocks. Measure your wood airgun stock outline before ordering to confirm screw hole alignment.

Pros & cons32

Pros

• Proprietary NAVCOM construction provides shock absorption and barrel rise reduction
• All-weather non-slip exterior prevents buttstock drift during offhand shooting
• Thin 0.3-inch profile minimizes unwanted changes to rifle length of pull

Cons

• Firearm-specific screw spacing requires checking your airgun buttstock hole layout
• Specific stock contour may require checking against your factory wood buttplate

8

Uncle Mike's 24580 Hammer Extension for Marlin Lever Actions (1983

View on Amazon

• ARS Mark

  ARS Mark is a ranking system developed by bestairriflescopes.com. ARS Mark has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.6
• Brand
  Uncle Mike's

Key specs2

Optic Cocking Clearance

Provides an extended side spur so shooters can safely cock and uncock the hammer when a scope overhangs the rifle receiver.

Hammer Spur Compatibility

Fits Marlin lever actions (1983 and later)

Pros & cons32

Pros

• Off-set knurled spur provides positive thumb purchase when cocking beneath low optics
• Designed specifically for Marlin lever-action hammer spurs manufactured in 1983 and later
• Durable all-metal construction resists stripping during regular range cocking cycles

Cons

• Designed around Marlin centerfire hammers and requires checking airgun hammer thickness
• Improper set-screw tension could loosen during repeated cycling, requiring checkups

Last update on 2026-10-09 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API

Will Marlin firearm stocks fit an Umarex air rifle?

No. Firearm furniture such as the Magpul ELG M-LOK stock is engineered specifically for Marlin 1895, 1894, and 336 centerfire frames rather than air rifle receivers. Airguns house internal valves, CO2 pathways, and different mechanical linkages that do not match firearm receiver tangs or inletting dimensions. Attempting to bolt a centerfire stock onto an air rifle can damage the action or leave loose fittings. Always verify receiver geometry and mounting attachment points in your airgun documentation before ordering replacement furniture.

Which rotary magazine works with the Umarex lever-action rifle?

The genuine Umarex .177 caliber 8-shot rotary magazine is the exact match for the Umarex Lever Action Rifle. Built to run .177 caliber lead pellets, this circular metal magazine is also shared across handguns like the Walther CP88, CP99, PPQ, Beretta M 92 FS, Colt Government Model 1911 A1, and HK P30. Using incorrect pellets or third-party cylinders can bind the advancing pawl and stall your lever throw. If you prefer round steel ammunition over lead pellets for casual shooting, check our guide on the best CO2 BB gun options available.

How do you mount a 1-inch scope without blocking the hammer?

Use dedicated airgun rings with sufficient height clearance, such as the RWS Lock Down Scope Mount for air rifles with 1-inch rings. Mounting an optic directly above a lever action can crowd the cocking spur, making it difficult to cock or uncock safely with your thumb. If ring clearance is minimal, an offset accessory like the Uncle Mike's hammer extension for Marlin lever actions helps restore positive thumb purchase under the ocular bell. Confirm both the ring height and eye relief before locking down mounting screws.

Can you install a Marlin Picatinny rail on an airgun receiver?

No, centerfire rails do not share mounting hole spacing with airgun receivers. Mounts such as the Gotical 12-slot Picatinny rail measure 5.1 inches long and are CNC-machined from aircraft-grade aluminum alloy specifically for Marlin 1895, 336, 375, and 444 firearms. While that rail features a deep U-cut channel to view iron sights, its pre-drilled screw spacing will not line up with typical air rifle receiver tops. For setups that arrive from the factory with modern optics rails already installed, explore the best tactical air rifle options.

Will firearm recoil pads fit an air rifle wood buttstock?

Firearm recoil pads will only fit if your airgun stock matches the exact pad template dimensions. For example, the LimbSaver 10806 AirTech pad is molded to fit select firearm buttstocks measuring 4.7 by 1.6 inches, while the LimbSaver 10102 Classic pad fits specific factory Marlin and Remington profiles. Classic wood airgun stocks frequently have different heel-to-toe curves, thickness contours, and screw-hole spacing. Measure your wood stock butt plate directly with a caliper before buying any precision-fit pad.

What kit should you use to clean a .177 lever-action barrel?

Use an airgun-specific system such as the Umarex .177 and .22 caliber air gun cleaning kit. This set includes a caliber-matched cleaning rod, bore brushes, mops, a driver set, and specialized cleaning pellets designed for airgun barrels. Standard firearm rods and harsh wire brushes can scratch softer air rifle steel or harm the delicate crown at the muzzle. Pushing soft cleaning pellets through the bore clears out lead fouling and dust while protecting internal seals from solvent degradation.