Dot Sights

Stiff tension springs make AK rear sights feel stuck. Push down firmly over the pivot pins to free the leaf, then slide it out without gouging your finish.

Take off your Glock front sight cleanly using a thin-wall hex tool. Soften stuck factory glue, remove pinned plastic sights, and keep the slide scratch-free.

Push a Glock rear sight out left to right with a sight pusher or brass punch. Check for hidden set screws first to prevent damage to your slide finish.

Drive the taper pins out from left to right, disconnect the gas tube, and slide your front sight base off without scratching the barrel or bending punches.

Support the barrel, spot the smaller end of each taper pin, and drive them out cleanly to remove your AR-15 front sight tower without scratching the metal.

Align your dot sight to the barrel center at 25 yards before heading to the range. Adjust your dials from a steady rest to hit paper on your first live shot.

Align your crossbow scope using a laser in the arrow track to hit paper on shot one. Save expensive bolts and dial in your target safely without dry-firing.

Align your scope crosshairs with the barrel at home using your eye or a simple tool. Stop wasting ammo and get your first shot right on the paper target.

Align your red dot at home using a simple chamber or muzzle laser. Stop wasting costly ammo and make sure your very first range shot hits paper cleanly.

Remove the bolt, look down the barrel, and center your optic on a 25-yard target. Stop wasting expensive ammo and hit paper on your very first shot.

Safely align your pistol sights at home using a laser tool to save ammo. Adjust your dot to get on paper in minutes before heading to the firing range.

Align your AR-15 optic at home by looking down the barrel or using a laser tool. Save ammo and get on target before firing your first live round at the range.

Look through the barrel to center a target, then adjust your dot to match. Save ammo and get on paper using simple visual alignment from a steady rest.

Align your sight at home with a laser so you do not waste ammo at the range. Dial your dot onto the beam at 25 yards to hit paper on your first live shot.

Align your sight with the rifle barrel at 25 yards using a simple visual check or a laser tool. Save ammo and land your first shot cleanly on the paper target.

Sight distance means the gap between your iron sights or your downrange zero with a red dot. Sort out the terms so you can position your optic and aim true.

Fix a twisted bow peep sight by nudging the D-loop, sliding in a tuner, or resetting the tube so you get a clean view of your target on every full draw.

A dovetail sight uses an angled base that slides sideways into a matching wedge slot. See how it locks tight and how to verify your cut before upgrading.

A sight pusher is a screw clamp that presses pistol sights into place with steady force, preventing the scratched slides and broken vials caused by hammers.

A bore sight shines a laser down your barrel to align a red dot before shooting. See how it saves ammo at home and why you still need a few shots at the range.